Meeting rooms
Switch from open collaboration to visual privacy for calls, reviews and presentations.
Specify glass that changes from transparent to frosted at the touch of a control. SEG coordinates the glass composition, encapsulated PDLC layer, electrical preparation, installation and commissioning for villas, offices, healthcare, hospitality and commercial interiors across the UAE and GCC.
Laminated smart glass is a complete switchable glazing panel. A PDLC layer is encapsulated between glass and approved interlayers during controlled factory production. When powered, the liquid-crystal layer aligns and the panel becomes transparent. When power is removed, light scatters and the glass becomes frosted.
Unlike retrofit film, this is supplied as a finished glass unit made to approved dimensions. It suits new openings and replacement glazing where safety, privacy, appearance and electrical coordination need to be designed together.
Powered · TransparentUnpowered · Frosted privacyThe result depends on the approved glass build-up, PDLC layer, controlled lamination, protected edges, power supply and installation working as one engineered system.
Glass thickness, interlayers, PDLC orientation, edges and electrical exits are coordinated.
The PDLC layer and interlayers are encapsulated between the selected glass panes under controlled production conditions.
With power on, the liquid-crystal molecules align and allow more light to pass through.
With power off, the molecules scatter light and create the familiar frosted appearance.
Laminated smart glass suits new panels where privacy, safety glazing, framing, electrical routes and architectural detailing can be planned as one system.
Switch from open collaboration to visual privacy for calls, reviews and presentations.
Create privacy only when needed while retaining a light, open interior at other times.
Support flexible privacy in consultation, examination and treatment environments.
Add controllable privacy to glazed bathrooms, suites and guest-facing spaces.
Use smart privacy for bedrooms, dressing areas, home offices and internal partitions.
Control visibility, create reveal moments or prepare a frosted surface for compatible projection.
The switchable film sits inside the laminated construction rather than on an exposed glass face.
Move between transparent and frosted privacy using the selected control.
Reduce the need for curtains, blinds and bulky privacy hardware on the glass.
Panel size, glass build-up, film layout and electrical exits are prepared for the approved opening.
Compatible systems can respond to remotes, switches, sensors and smart controls.
The frosted state blocks direct views while allowing diffused light through the space.
The laminated panel cannot be resized after production. Dimensions, construction and electrical details must therefore be approved first.
Important
The final glass build-up, interlayer, heat treatment, edge protection and intended environment must be reviewed for the specific project. One standard composition should not be assumed for every opening.
Final sizes, tolerances, holes, cut-outs and film coverage must be frozen before production.
Glass type, thickness, interlayers and safety requirements must suit the opening and intended use.
Framing, sealants, moisture exposure and cable exits must protect the panel and electrical connections.
Busbar location, cable route, power supply, control point and future service access must be planned early.
Privacy, haze, viewing angle, ambient light and any projection requirement should be reviewed before approval.
Available controls depend on the electrical design and selected equipment. SEG coordinates the film and control route as one system.
A familiar dedicated control for direct clear and frosted operation.
Convenient wireless operation where the specified controller supports it.
Automate switching based on presence or another approved input.
Connect compatible controls to smart-home or building-management logic.
Understand the room, glass and privacy objective.
Confirm dimensions, build-up, edges and wiring.
Prepare and laminate the purpose-made glass panel.
Fit the panel and complete protected electrical connections.
Test operation and explain correct use and care.
Send the location, opening sizes, drawings, panel quantities, intended glass build-up and preferred control method. We will review the application and advise the right next step.
No. It is supplied as a new purpose-made glass panel. If the existing glass is suitable and replacement is not preferred, self-adhesive retrofit smart film may be considered separately.
PDLC film changes from frosted to a transparent state when powered. It is not identical to completely bare glass, so viewing angle, ambient light and the selected film should be considered during specification.
The standard configuration returns to the frosted privacy state when power is removed. This behavior is useful for applications that prefer privacy by default.
Yes, compatible installations can use wall switches, remotes, sensors and selected smart-control integrations. The control route should be agreed before installation.
It can be considered where the glass construction, framing, edge protection, moisture conditions and electrical safety are suitable. The application requires project-specific review.
No. Dimensions, holes and cut-outs must be approved before lamination. Site alteration can damage the glass, film or electrical system.