Meeting rooms
Switch from open collaboration to visual privacy for calls, reviews and presentations.
Turn suitable glass from transparent to frosted in an instant. SEG supplies, installs and integrates switchable privacy film for offices, villas, healthcare, hospitality and commercial interiors across the UAE and GCC.
Self-adhesive smart film is a switchable PDLC privacy layer installed directly onto suitable existing glass. When powered, the liquid-crystal layer aligns and the film appears transparent. When power is removed, light scatters and the glass appears frosted, giving immediate visual privacy.
It is commonly selected when a project needs smart privacy but removing and replacing the existing glazing would add unnecessary time, disruption or cost.
Powered · TransparentUnpowered · Frosted privacyThe complete result depends on the film, glass condition, edge preparation, electrical system and quality of installation working together.
The self-adhesive PDLC film is carefully installed onto the prepared glass surface.
Busbars, wiring and the specified power supply connect the film to its control method.
With power on, the liquid-crystal molecules align and allow more light to pass through.
With power off, the molecules scatter light and create the familiar frosted appearance.
Self-adhesive film works best where existing glass should remain in place and privacy needs to change during the day.
Switch from open collaboration to visual privacy for calls, reviews and presentations.
Create privacy only when needed while retaining a light, open interior at other times.
Support flexible privacy in consultation, examination and treatment environments.
Add controllable privacy to glazed bathrooms, suites and guest-facing spaces.
Use smart privacy for bedrooms, dressing areas, home offices and internal partitions.
Control visibility, create reveal moments or prepare a frosted surface for compatible projection.
Suitable projects can upgrade privacy while retaining the installed glass panel.
Move between transparent and frosted privacy using the selected control.
Reduce the need for curtains, blinds and bulky privacy hardware on the glass.
Film, control method and wiring route can be planned around the approved glass layout.
Compatible systems can respond to remotes, switches, sensors and smart controls.
The frosted state blocks direct views while allowing diffused light through the space.
A site review prevents avoidable issues and confirms whether retrofit film or laminated smart glass is the better solution.
Important
Self-adhesive film is not automatically suitable for every glass surface or wet, exposed or high-risk location. Final selection should follow a technical review.
The surface should be smooth, stable and free from damage, coatings or contamination that could affect adhesion.
Exact visible glass sizes, joints and film orientation must be confirmed before preparation.
Frames, sealants, moisture exposure and cleaning conditions affect the required edge treatment.
A safe route is needed for busbars, cables, power supplies, switches and access for maintenance.
Privacy level, viewing angle, ambient light and any projection requirement should be discussed early.
Available controls depend on the electrical design and selected equipment. SEG coordinates the film and control route as one system.
A familiar dedicated control for direct clear and frosted operation.
Convenient wireless operation where the specified controller supports it.
Automate switching based on presence or another approved input.
Connect compatible controls to smart-home or building-management logic.
Understand the room, glass and privacy objective.
Check dimensions, substrate, access and wiring.
Confirm layout and prepare film to approved sizes.
Apply film and complete electrical connections.
Test operation and explain correct use and care.
Send the location, glass dimensions, photos, number of panels and preferred control method. We will review the application and advise the right next step.
Often yes, provided the glass is suitable, smooth, accessible and in good condition. SEG checks the surface, dimensions, edges and electrical route before confirming the installation method.
PDLC film changes from frosted to a transparent state when powered. It is not identical to completely bare glass, so viewing angle, ambient light and the selected film should be considered during specification.
The standard configuration returns to the frosted privacy state when power is removed. This behavior is useful for applications that prefer privacy by default.
Yes, compatible installations can use wall switches, remotes, sensors and selected smart-control integrations. The control route should be agreed before installation.
It can be considered for suitable bathroom glass, but moisture, direct water exposure, edges, sealants and electrical safety require careful review. Laminated smart glass may be preferable in more demanding conditions.
Use the care method provided at handover. In general, avoid abrasive tools, harsh chemicals and excessive liquid at film edges or electrical connection points.